Laboratory & Dental

CENALED FLOOD Flexarm AC, protection class IP65, a powerful and flexible LED task light for industrial use. With a light color of 5700K 3-step MacAdam and a beam angle of 118° -> Halbwertswinkel, it provides excellent illumination of the work area. Thanks to the flexible arm, the luminaire can be individually aligned.

CENALED FLOOD Flexarm DC, protection class IP67, a powerful and flexible LED task light for industrial use. With a light color of 5700K 3-step MacAdam and a beam angle of 118° -> Halbwertswinkel, it provides excellent illumination of the work area. Thanks to the flexible arm, the luminaire can be individually aligned.

The CENALED LENS flex-arm magnifying luminaire brings out even the smallest details. The magnifier comes with double magnification and the tightly bendable gooseneck holds the head of the magnifying lamp securely in position after alignment. The area to be magnified below the lens is very well illuminated. For switching and dimming, there is a push-button on the head of the luminaire. The high illuminance is sufficient to use the magnifying luminaire as simple workplace lighting. The lens is protected by a cover.The screw-on base is an option for further fixings such as a magnetic clamp, table clamp or wall mount. In comparison to the CENALED LENS Flexarm DC with 24V DC connection, the base of the 100-305V AC version is slightly higher. The CENALED LENS Flexarm AC is connected via a SCHUKO plug and a 3 m long cable.

The CENALED LENS flex-arm magnifying luminaire brings out even the smallest details. The magnifier comes with double magnification and the tightly bendable gooseneck holds the head of the magnifying lamp securely in position after alignment. The area to be magnified below the lens is very well illuminated. For switching and dimming, there is a push-button on the head of the luminaire. The high illuminance is sufficient to use the magnifying luminaire as simple workplace lighting. The lens is protected by a cover.The screw-on base is an option for further optional attachments such as a magnetic clamp, table clamp or wall bracket. The CENALED LENS Flexarm DC is connected to 24V machine power via a 3m cable.

CENALED SPOT Flexarm, the LED task luminaire with gooseneck, screw-on base and 30° optics for wider spot light. The housing of this extraordinary luminaire series is made of powder-coated aluminium. The repositionable flexible arm, or gooseneck, is 500 mm long. The LED technology in the luminaire head is protected by 4 mm of safety glass, completing the requirements for the approved high degree of protection. Economical high-power LEDs ensure a luminous efficacy of 134 Im/W, which is exceptional in this class.The CENALED SPOT is available for machine connection with 24V DC and for direct connection with 100-305V AC. The connecting cables leading from the LED luminaire are each 3 m long.The CENALED SPOT is equipped with a screw-on base as standard. As a non-destructive installation variant, the luminaire can thus be screwed onto an optional magnetic holder and fixed to all magnetically adherent surfaces.

CENALED SPOT Flexarm, the LED task luminaire with gooseneck, screw-on base and 30° optics for wider spot light. The housing of this extraordinary luminaire series is made of powder-coated aluminium. The repositionable flexible arm, or gooseneck, is 500 mm long. The LED technology in the luminaire head is protected by 4 mm of safety glass, completing the requirements for the approved high degree of protection. Economical high-power LEDs ensure a luminous efficacy of 134 Im/W, which is exceptional in this class.The CENALED SPOT is available for machine connection with 24V DC and for direct connection with 100-305V AC. The connecting cables leading from the LED luminaire are each 3 m long.The CENALED SPOT is equipped with a screw-on base as standard. As a non-destructive installation variant, the luminaire can thus be screwed onto an optional magnetic holder and fixed to all magnetically adherent surfaces.

The CENALED SPOT DC is a high-intensity LED luminaire with a high degree of protection - suitable for original equipment manufacturers or for retrofitting in the machine sector. Thanks to IP67 - i.e. dust and water protected - and robust aluminum housing with strong safety glass, the luminaire can also be used in areas where the going gets rough - such as in automatic drilling machines and CNC or milling machines. The compact luminaire is available as a recessed and surface-mounted version.  Depending on the variant, an area can be illuminated with pinpoint accuracy or over a medium area. Depending on requirements, both versions are available with 15°, 30° and 65° optics. The luminaire - whether recessed or surface-mounted - is connected via an A-coded M12 plug connection with reverse polarity protection.The CENALED SPOT Einbau DC is mounted with four M5 countersunk screws in a mounting shaft or opening measuring at least 81 mm x 81 mm. A supplied gasket behind the luminaire bezel seals the luminaire to the rear.

The CENALED SPOT DC is a high-intensity LED luminaire with a high degree of protection - suitable for original equipment manufacturers or for retrofitting in the machine sector. Thanks to IP67 - i.e. dust and water protected - and robust aluminum housing with strong safety glass, the luminaire can also be used in areas where the going gets rough - such as in automatic drilling machines and CNC or milling machines. The compact luminaire is available as a recessed and surface-mounted version.  Depending on the variant, an area can be illuminated with pinpoint accuracy or over a medium area. Depending on requirements, both versions are available with 15°, 30° and 65° optics. The luminaire - whether recessed or surface-mounted - is connected via an A-coded M12 plug connection with reverse polarity protection.The CENALED SPOT Einbau DC is mounted with four M5 countersunk screws in a mounting shaft or opening measuring at least 81 mm x 81 mm. A supplied gasket behind the luminaire bezel seals the luminaire to the rear.

LED profile light with adjustable pull pendant, luminaire length 1000 mm (~39,37“), cover Microprisms, Connection value 120-277V AC ± 10%, 50-60 Hz from ceiling transfer point, ceiling suspension via pull pendant with spiral cable, extension length from top ~900 mm - 1800 mmProfiled LED light with pendant suspension for flexible illumination of workstations: The PROFILED AC with adjustable pull pendant suspension is an inexpensive task luminaire for manual workplaces or workshops. Inexpensive because they cost more than pay for themselves in the course of the light's use. If the service life, reliability, and maintenance-free of this LED light are taken into account at the time of purchase, the luminaire is still significantly cheaper than cheaper alternatives.Mounting to the ceiling, the suspended light is pulled down or pushed up via the height-adjustable drawbars. In this way, the illuminance at the workplace can be variably adjusted. If this is not enough, you can get the version with additional dimming. As with the PROFILED AC, there is a switch on the side of the housing or, in the version with dimming, a push-button.

LED Profilleuchte mit Zugpendel, Leuchtenlänge 1000 mm, Abdeckung Mikroprismen, Anschlusswert 120-277V AC ± 10%, 50-60 Hz ab Deckenübergabepunkt, Deckenabhängung über Zugpendel mit Spiralkabel, Zugpendel-Auszugslänge von oben ~900 mm - 1800 mmLED-Profilleuchte mit Zugpendel zur flexiblen Beleuchtung von Arbeitsplätzen: Die PROFILED AC mit Zugpendelabhängung ist eine preiswerte Arbeitsplatzleuchte für Handarbeitsplätze oder Werkstätten. Preiswert deshalb, weil die Kosten sich im Laufe des Einsatzes der Leuchte mehr als bezahlt machen. Wird bei der Anschaffung die Lebensdauer, Zuverlässigkeit und Wartungsfreiheit dieser LED-Leuchte mitberücksichtigt, so ist die Leuchte auch gegen billigere Alternativen noch deutlich günstiger.An der Decke befestigt, wird die abgehängte Leuchte über die höhenverstellbaren Zugpendel nach unten gezogen oder nach oben geschoben. So lässt sich die Beleuchtungsstärke am Arbeitsplatz variabel anpassen. Wem das noch nicht reicht, greift zur Variante mit zusätzlicher Dimmung. Wie bei der PROFILED AC befindet sich seitlich am Gehäuse ein Schalter oder, bei der Variante mit Dimmung, ein Taster.

The ultimate LED workstation light: high-output, low-shadow illumination and an extended-reach articulated arm:The UNILED II series is a functional, high-output LED articulated arm light for any workstation. The light produces homogeneous, shadow-free and glare-free area illumination, which can be positioned as required using high-quality aluminium spring-balanced arms connected via 3D joints.LED articulated arm light UNILED II, light width 298 mm (11.7 in), daylight white, IP40, movable aluminium spring arm 2x 400 mm (15.7 in), 100° optics, 24V DC, supplied complete with 100–240V power supply unit and table clamp...........................................................................................................................................The UNILED series was originally developed for workstations in the jewellery and watchmaking industries. Today, this high-output articulated arm light is also used in many other areas, such as laboratories, quality assurance, workshops, or simply as workstation lighting.With the UNILED II, the proven series has been redesigned: state-of-the-art LED technology, shadow-free and glare-free illumination and, for many users, a very important feature: the extended-reach articulated arms. The UNILED II is currently available in variants with different light widths. In addition, versions with integrated dimming are available. For the watchmaking industry, the Watchmaker version was introduced with a shortened front articulated arm and medium light width.All UNILED II models share outstanding ergonomic handling as well as homogeneous shadow-free and glare-free illumination – making the UNILED II the ideal solution for industrial workstations, laboratories and the jewellery and watchmaking industries.

The ultimate LED workstation light: high-output, low-shadow illumination and an extended-reach articulated arm:The UNILED II series is a functional, high-output LED articulated arm light for any workstation. The light produces homogeneous, shadow-free and glare-free area illumination, which can be positioned as required using high-quality aluminium spring-balanced arms connected via 3D joints.LED articulated arm light UNILED II, dimmable, light width 298 mm (11.7 in), daylight white, IP40, movable aluminium spring arm 2x 400 mm (15.7 in), 100° optics, 24V DC, supplied complete with 100–240V power supply unit and table clamp...........................................................................................................................................The UNILED series was originally developed for workstations in the jewellery and watchmaking industries. Today, this high-output articulated arm light is also used in many other areas, such as laboratories, quality assurance, workshops, or simply as workstation lighting.With the UNILED II, the proven series has been redesigned: state-of-the-art LED technology, shadow-free and glare-free illumination and, for many users, a very important feature: the extended-reach articulated arms. The UNILED II is currently available in variants with different light widths. In addition, versions with integrated dimming are available. For the watchmaking industry, the Watchmaker version was introduced with a shortened front articulated arm and medium light width.All UNILED II models share outstanding ergonomic handling as well as homogeneous shadow-free and glare-free illumination – making the UNILED II the ideal solution for industrial workstations, laboratories and the jewellery and watchmaking industries.