Accessories

LED2WORK DIMMbox with rotary knob and ON/OFF switch. The DIMMbox is made of:Casing: ABS The DIMMbox is equipped with an M12 input (socket, A-coded) and an M12 output (plug, A-coded). The brightness is controlled via an integrated rotary potentiometer. For easy installation, the DIMMbox can be mounted directly onto T-slot profiles thanks to its mounting tabs. This module is ideal for dimming LED2WORK 24V DC lights with an A-coded M12 connection (except RGB models) and supports a power ofmax. 144 W.

Non-destructive mounting for LED2WORK luminaires!The strongly magnetically adhering pair of permanent magnets in combination with a listed luminaire holder guarantees a safe and non-destructive mounting for almost all machine, signal and industrial luminaires, provided they can be attached to surfaces with good magnetic adhesion. The magnet itself is either attached to the luminaire holder or directly to the luminaire.Delivery includes M5 screws DIN 912.

The external PWM_Module is a dimmer for all 24V DC LED2WORK luminaires used for lighting. The dimmer is controlled via signals from an external controller, e.g. PLC.Scope of delivery: PWM module for one LED luminaire, black, with input M12 socket, A-coded and output M 12 plug, A-coded, protection class IP54.The box can also be mounted on T-slot profiles via the mounting straps on the housing.Suitable connection cables for the box can be found in the product accessories under connection & interlinking.

Guided by experience and manufactured according to our ideas: AC / DC industrial power supply unit for fixed voltage of 24V DC in a sealed die-cast housing made of aluminum, inside thermally conductive silicone. Enough power for several LED2WORK luminaires connected in series (cascading).Input 110-240 V AC via an open 3-pin cable, output 24V DC via M12 A-coded, cable all round protected by flexible metal protection hose.Flexible to use and extremely robust!

Guided by experience and manufactured according to our ideas: AC / DC industrial power supply unit for fixed voltage of 24V DC in a sealed die-cast housing made of aluminum, inside thermally conductive silicone. Enough power for several LED2WORK luminaires connected in series (cascading).Input 110-240 V AC via an open 3-pin cable, output 24V DC via M12 A-coded, cable all round protected by flexible metal protection hose.Flexible to use and extremely robust!

24V sensor cable, 10 m, PUR, black, 4-core, with M12 socket A-coded on one side and four open cable ends on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function)

24V DC sensor cable, 10 m, black, 4-wire, with M12 socket A-coded on one side and M12 plug A-coded on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function)

24V sensor cable 4-pole, PUR, 2.5m - M12 socket/open cable ends, A-coded, 24V DC sensor cable, 2.5m, black, 4-wire, with M12 socket A-coded on one side and four open cable ends on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function)

24V DC sensor cable, 2.5 m, black,5-core, with M12 socket A-coded on one side and five open cable ends on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection, mainly RGB and RGB-W luminaires. A 5-pole cable is required here for the signal function.

24V DC sensor cable, 5 m, black, 4-core, withM12 angled socket A-coded on one side and four open cable ends on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function)LED luminaire SPOTLED II surface-mounted in conjunction with the optional articulated bracket requires an M12-A angled socket.

24V DC sensor cable, 5 m, black, 4-core, with M12 socket A-coded on one side and four open cable ends on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function)

24V DC sensor cable, 5 m, black,5-core, with M12 socket A-coded on one side and five open cable ends on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection, mainly RGB and RGB-W luminaires. A 5-pole cable is required here for the signal function.

24V DC sensor cable, 5 m, black, 4-wire, with M12 socket A-coded on one side and M12 plug A-coded on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function)

24V DC sensor cable, 10 m, black,5-core, with M12 socket A-coded on one side and five open cable ends on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection, mainly RGB and RGB-W luminaires. A 5-pole cable is required here for the signal function.

24V DC sensor cable, 2.5 m, black, 4-wire, with M12 socket A-coded on one side and M12 plug A-coded on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function)

Luminaire holder made of aluminium for the LED luminaires TUBELED_70 and INROLED_70. The two holders accommodate the LED luminaire in diameter. The luminaire can be aligned within 360° and is then clamp-fixed in the desired position.

Power connection cable for one LED system luminaire SYSTEMLED: Connection cable with Wieland GST18i3 socket and SCHUKO angled plug.

Power connection cable for one LED system luminaire SYSTEMLED: Connection cable with Wieland GST18i3 socket and SCHUKO angled plug.